![]() Fix any Printer Driver Problem Before you begin, Look at the installed Printers on Your Computer ( You are looking for PDF Printer Drivers )
STEP 1 -- Do you have a good PDF Printer Driver installed?
YES - Proceed to STEP 2
NO - Install one of these PDF Printer Drivers from the internet
For EXAMPLE: - From the CutePDF website:
![]()
For EXAMPLE: - From the PDF reDirect website:
![]()
For EXAMPLE: - From the PDF995 website:
![]() STEP 2 -- Print to the PDF Printer Driver - then to your printer
1 - Run the ProTEXT (or ProDEX) program.
2 - Click File, then Open, to open your ASCII Transcript file. ( -or- File and Make an Index from ProDEX ) 3 - Click File, then Printer Setup... 4 - Change Printer Name to One of your PDF Printers, then click OK 5 - Click File then Print... to bring up the Print dialog. 6 - DO NOT CHECK "Print to File" - ( this is very important! ) 7 - Click OK, and the PDF Printer Driver will save your PDF file to your hard drive. 8 - Click OK and PDF program will appear with your print job visible. 9 - From the PDF program, select "File" then "Print" and print to your physical printer.
NOTE: PDF gives you a chance to set the Drive, Folder and Filename that will contain your generated PDF File.
Pay Attention - Please Remember this Filename and Folder! Click Here to see a PDF file created from ProTEXT. (Opens in New Tab) |
||||||||||||||